Ultimaker Cura has different distinct infill patterns. Infill (in orange) shows how your model is filled. Top/Bottom (in yellow) represents the skin – the horizontal parts of the model including the top-most parts and the bottom-most parts. Inner walls go between skin or infill the inner parts of the model and the outer wall. The outer wall will always be present, although this may not be the case for the inner wall. Do not confuse this with top or bottom surface, or the skin. The green wall is the inner wall. Shell (in red) represents only the vertical outer wall of your model. This helps prevent stringing when switching nozzles Prime towers – structure typically placed at the back of the build plate so that the nozzle can wipe the oozing material.Build plate adhesion – the skirt, the brim, raft – so your models stick better to the build plate.Support structures – so your overhangs will not fall.Rather, helpers exist to ensure the quality of your printed model. These helpers are printed parts that you will not see in Solid View. Helpers (in cyan) are commonly printed with your support material, but are not part of your model. Line Type is especially useful, as it shows detailed information about specific parts of your print. Line Type is the best option when you want to better see the parts of your model.Material Color shows you the layers in colors, depending on material type.Layer Thickness shows you the layers and differentiates by thickness. This is useful when you have the “Adaptive Layers” setting enabled.Layer view. Layer view will give you four color schemes, each with a purpose: Should this occur, you can repair your model using tools like Meshmixer or Netfabb. Missing surfaces will be drawn in red in X-ray view. If you try to slice it, but your design is broken, Ultimaker Cura will not be able to generate layers for it, resulting in missing layers. With X-ray view, you don’t need to slice your model yet. Just load the model, go to the “Preview” tab and switch to “X-ray view.” This is useful to check, as you are able to quickly tell if your design is broken or not watertight. Preview mode has two views – X-ray and Layer view Ultimaker Cura’s Preview mode will show you what the layers look like and how they will be printed. When using Ultimaker Cura, your models are "sliced" into horizontal layers and transformed into files that your printer can understand. Here are a few tips on how to best prepare your print job files using Ultimaker Cura – ensuring you will have the best shot at success. There are many ways to do this, depending on the type of part, materials used, and many other factors. It is essential to properly prepare a print file before you begin the actual 3D printing process.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |